The Weirless Radial diaphragm valve of choice
Designed for tough applications and critical processes, ASEPCO Weirless Radial diaphragm tank-bottom valves provide the highest level of reliability and safety.
Five ranges of valves with 14 valve types
Manual or pneumatic actuators, limit switches and solenoids
Diaphragm materials include silicone, EPDM, Viton and PTFE with special materials for repeat steam cleaning
Lowest lifetime cost
Delivering purity and reliability, ASEPCO Weirless Radial tank bottom valves are preferred over weir style valves which can introduce product entrapment, leakage and be high maintenance.
ASEPCO valves have an easy diaphragm changeover principle – taking less than a minute to complete in most circumstances. Valve benefits include
No tools needed and no special training required
Integrated, non-adjustable travel stops
Flush mount design and simple clamp assembly
Extensive testing proves reliability
Diaphragms materials are USP Class VI and FDA CFR 177.300 tested and approved, with extensive steam and lifetime testing. This means they complete an impressive continuous 100-hour testing in 132-137C, with actuation every 20 minutes.
ASEPCO radial diaghrapm tank-bottom valve
Valves have a 90 degree (angled) flow path
Many valve body configurations including custom machined
Up to three ports to allow CIP/SIP or flush while closed
ASEPCO radial diaphragm retrofit valve
Use to add Asepco valves to existing tanks
Many different designs to fit your specific situation
Valve sizes: 0.5", 1.0", 1.5", 2.0", 2.5", 3.0", 4.0"
ASEPCO radial diaphragm sterilite valve
A special steam port added to our standard tank-bottom valve
Totally eliminates dead legs associated with steam or cleaning fluid ports on closed valve
ASEPCO radial diaphragm insulate valve
Use with freeze tanks or any tank that has a critical temperature control mission
Extended body allows for direct welding of vessel jacket
Valve sizes: 0.5", 1.0", 1.5", 2.0", 2.5", 3.0", 4.0"
ASEPCO radial diaphragm tangential valve
Use in situations where a tank valve needs to be mounted off-center
Easy to clean and eliminates pooling in the tank
Valve sizes: 0.5", 1.0", 1.5", 2.0", 2.5", 3.0", 4.0"
A full range of actuation options available:
Manual
Pneumatic
Automation with switches or controllers
Eight materials cope with virtually every pressure, temperature and chemical challenge in the food and biopharm industries
Materials include:
Silicone
EPDM
Silicone plus
EPDM plus
Viton A
Viton A (steam resistent)
Viton GF
PTFE
All diaphragms are laser-etched with cure dates and batch numbers, ensuring that they are completely traceable.