Description
Knife gate valve for instalation betweeen flanges acc. DIN EN 1092-1 and useable as end-valve,with self cleaning plate guidance and flash-out-corners, self adjusting COMPACT-Cross-seal towards the atmosphere, hermetically sealed in both flow-directions, two-piece body, metallic and jitter-free guided knife plate with segment-formed radius, cutting edge on the lower body surface.
DN 50-DN 1200
AT200-Materials (D-GB).pdf 232 KB
Germany
AT200-DN50-300 with hand wheel (D-GB).pdf 261 KB
Germany
AT200-DN50-300 with chain wheel (D-GB).pdf 156 KB
Germany
AT200-DN600-1200 with bevel gearbox (D-GB).pdf 397 KB
Germany
AT200-DN350-1200 with hydraulic cylinder (D-GB).pdf 77 KB
Germany
AT200-DN50-300 with hydraulic cylinder (D-GB).pdf 70 KB
Germany
AT200-DN350-500 with square (D-GB).pdf 74 KB
Germany
AT-Sealing replacement (GB).pdf 704 KB
Germany
AT200-Materials (D-GB).pdf 232 KB
Germany
AT200-DN350-500 with hand wheel (D-GB).pdf 82 KB
Germany
AT200-DN350-1200 with electric actuator SA 10_2-16_2 (D-GB).pdf 85 KB
Germany
AT200-DN50-300 with electric actuator (D-GB).pdf 79 KB
Germany
AT200-DN50-300 with pneumatic cylinder (D-GB).pdf 78 KB
Germany
AT200-DN350-1200 with electric actuator SA 10_1-16_1 (D-GB).pdf 85 KB
Germany
AT200-DN350-700 with pneumatic cylinder (D-GB).pdf 80 KB
Germany